Cement ( 40 Results )

Applications

Non-structural concrete applications

Plastering, rendering and pavement works

Tile adhesives and grouting mortars

Non-structural precast elements

Applications

Concrete works subjected to aggressive soils or ground water and where high Sulphate exposure is expected. It is also suitable for foundation work.

Sewage works

Precast sewage water pipe and manholes

Applications

General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).

All uses where the special properties of other types are not required.

Where high compressive strength is required.

Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

General purpose Portland pozzolana cement.

Requirements of the standard specifications 4756-1/2013 and BS EN 197-1/2011.

Applications

• Concrete works subjected to aggressive soils or ground water and where high Sulphate exposure is expected. It is also suitable for foundation work.
• Sewage works
• Precast sewage water pipe and manholes

Target Market

• Ready mix companies
• General contractors
• Precast companies

Can be used in all concrete constructions: reinforced concrete foundations, sewage drainage tanks, bridge foundations, and piles that are exposed to be directly affected by sulfates. It can also be used in sewage concrete pipes and lining steel pipes. The use of materials with pozzolana properties with clinker, in accordance with Egyptian and international specifications, as pozzolana works to improve the properties of cement and concrete by reducing the reaction heat and cracks resulting from it, as it reduces porosity in concrete.

Usage:

• All construction purposes
• Mass concrete
• Reinforced concrete
• Plain concrete
• Precast concrete
• Finishing

Designed to be used for high-stress concrete elements in large projects. The product is characterized by a suitable initial setting time, making it the best choice for keeping your project on schedule. The use of materials with pozzolana properties with clinker, in accordance with Egyptian and international specifications, as pozzolana works to improve the properties of cement and concrete by reducing the reaction heat and cracks resulting from it, as it reduces porosity in concrete

Usage:

• All construction purposes
• Mass concrete
• Reinforced concrete
• Plain concrete
• Precast concrete
• Finishing

General purpose Portland pozzolana cement is known and found all over the world.

A mix of crushed clinker and gypsum to fulfill the requirements of the standard specifications ES 4756-1/2022 and EN 197-1/2011.

Applications

General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).

All uses where the special properties of other types are not required

Where high compressive strength is required

Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

General purpose Portland cement known and found all over the world.

A mix of crushed clinker and gypsum to fulfill the requirements of the standard specifications ES 4756-1/2022 and EN 197-1/2011.

Characteristics

Produced according to Egyptian standards ES 4756/1-2022 and complies with European specifications EN 197/1-2011.

Applications

General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).

All uses where the special properties of other types are not required

Where high compressive strength is required

Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

Target Market

Ready mix companies

General contractors

Precast companies

Pre-blending companies

Applications

General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).

All uses where the special properties of other types are not required.

Where high compressive strength is required.

Where concrete is not subjected to specific exposures, such as Sulphate attacks from

CEMEX is to reduce pollution and carbon emissions resulting from the manufacturing and use of cement. The company took the lead in developing its Assiut Cement

Applications

Non-structural concrete applications

Plastering, rendering and pavement works

Tile adhesives and grouting mortars

Non-structural precast elements

Applications

Main Applications

Reinforced concrete (slabs, columns, beams)

Foundations and rafts

Precast concrete elements

Infrastructure projects (bridges, tunnels, roads)

Applications

Concrete works subjected to aggressive soils or ground water and where high Sulphate exposure is expected. It is also suitable for foundation work.

Sewage works.

Precast sewage water pipe and manholes.

Applications

Mass concrete (dams, thick rafts, heavy foundations)

Large-scale infrastructure foundations

Underground works (tunnels, basements)

Sulphate-bearing soils and groundwater (moderate levels)

Projects requiring high durability and longevity

Applications:

When large cross sections and mass concrete is applied, such as bridges, dams, skyscrapers, and rafts, because it has reduced the heat of hydration (less than 210 KJ/Kg) which reduces cracks.

Where high compressive strength is required

Concrete works subjected to aggressive soils or ground water and where high sulphate exposure is expected, such as in coastal areas and used also in sewage systems

Features:

Super toughness and highest early and final stress

High humidification temperature

Suitable for hot weather

Uses

It is used in high-strength concrete, reinforced concrete, early stressing concrete, and in infrastructures that require high stress, such as bridges, suspended structures, and high-rise buildings.

Features:

Super toughness and highest early and final stress

High humidification temperature

Suitable for hot weather

Uses

It is used in high-strength concrete, reinforced concrete, early stressing concrete, and in infrastructures that require high stress, such as bridges, suspended structures, and high-rise buildings.

Features:

Helps to increase the strength of concrete

Increasing the lifespan of buildings

Resistant to cracks and reduces building corrosion

Resistant to sulfate and chloride salts, which reduces the possibility of iron rusting

Environmentally friendly as it reduces carbon emissions

Uses

It is used in all types of reinforced and ordinary concrete and large-sized concrete as it is characterized by a low temperature, which makes the required cooling rate less, and for all construction works that require medium and high early and final stress, for the manufacture of ordinary or semi-automatic cement bricks, for lining canals and waterways, bridge foundations and piles of all kinds.

It is used in all types of concrete structures such as reinforced foundations, sewage tanks, bridge foundations, piles of all kinds, sewage treatment plants, agricultural and industrial drainage, and all construction and building works exposed to the direct impact of sulfate salts. It is also used in industries complementary to the construction industry such as the industries of drainage pipes. Concrete and iron pipe lining

Higher durability  

High control over concrete cracking

Higher quality in the market  

Available in bulk and in bags

Uses and applications

It can be used in all concrete constructions such as reinforced concrete foundations, sewage drainage tanks, bridge foundations and piles which are exposed to be directly affected by sulfates. It can also be used in sewage concrete pipes and lining steel pipes.

A type of cement that generates low heat of hydration. This product is produced using selected raw materials (GGBS) confirming EN 15167-1 which is following a strict quality control system. This gives a consistent end product to conform finally with the requirements of EN 197-1/2011 and ES 4756-1/2022.

Characteristics:

Produced according to Egyptian standards ES 4756/1-2022 and complies with European specifications EN 197/1-2011.

Applications:

• When large cross sections and mass concrete is applied, such as bridges, dams, skyscrapers, and rafts, because it has reduced the heat of hydration (less than 210 KJ/Kg) which reduces cracks.
• Where high compressive strength is required
• Concrete works subjected to aggressive soils or ground water and where high sulphate exposure is expected, such as in coastal areas and used also in sewage systems.

General purpose portland cement is known and found all over the world.

Applications

General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).

All uses where the special properties of other types are not required

Where high compressive strength is required

Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

General-purpose Portland cement is known and found all over the world.

Applications:

• General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks, and masonry units).
• All uses where the special properties of other types are not required
• Where high compressive strength is required
• Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

Applications

• General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).
• All uses where the special properties of other types are not required
• Where high compressive strength is required
• Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

Target Market

• Ready mix companies
• General contractors
• Precast companies
• Pre-blending companies

Applications

• General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).
• All uses where the special properties of other types are not required
• Where high compressive strength is required
• Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

Target Market

• Ready mix companies
• General contractors
• Precast companies
• Pre-blending companies

Applications

• Concrete works subjected to aggressive soils or ground water and where high Sulphate exposure is expected. It is also suitable for foundation work.
• Sewage works
• Precast sewage water pipe and manholes
  

Target Market

• Ready mix companies
• General contractors
• Precast companies

Features:

Helps to increase the strength of concrete

Increasing the lifespan of buildings

Resistant to cracks and reduces building corrosion

Resistant to sulfate and chloride salts, which reduces the possibility of iron rusting

Environmentally friendly as it reduces carbon emissions

Uses

It is used in all types of reinforced and ordinary concrete and large-sized concrete as it is characterized by a low temperature, which makes the required cooling rate less, and for all construction works that require medium and high early and final stress, for the manufacture of ordinary or semi-automatic cement bricks, for lining canals and waterways, bridge foundations and piles of all kinds.

General purpose Portland cement is known and found all over the world.

Applications

General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).

All uses where the special properties of other types are not required

Where high compressive strength is required

Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

An easy-to-spread cement finishing material suitable for shell mortar work and all finishing works. It gives high adhesion to surfaces and is used in shell and ceramic works and building walls.

General purpose Pozzolana cement is known and found all over the world.

Applications

General purpose cement (reinforced concrete structures, bridges, railway infrastructure, tanks & reservoirs, culverts, pipes, floors, pavement, sidewalks and masonry units).

All uses where the special properties of other types are not required

Where high compressive strength is required

Where concrete is not subjected to specific exposures, such as Sulphate attacks from soil or water.

Portland Pozzolana Cement. CEM || A-P 32.5N

:Properties 

Highest utilization rate while tolerating high percentages of sand additives.

Suitable for hot climates.

Resistant to cracks and minimizes building corrosion.

Environmentally friendly as it reduces carbon emissions.

Resistant to sulfate and chloride salts, reducing the potential for iron to rust.

:Usage

It is used in the construction of all types of walls, all types of unreinforced concrete, precast concrete, concrete for roads, sidewalks and pavements, and for all types of masonry and finishes

General purpose Portland pozzolana cement.

Requirements of the standard specifications 4756-1/2013 and BS EN 197-1/2011.

Sulphate-resistant pozzolanic cement, grade 42.5, in accordance with European standards. It is used to protect foundations from cracks resulting from expansion, fragmentation, and corrosion. It is used in all concrete constructions and reinforced foundations exposed to direct sulphate salts in agricultural lands and lands near wastewater.

Applications
Concrete works subjected to aggressive soils or ground water and where high Sulphate exposure is expected. It is also suitable for foundation work.
Sewage works.
Precast sewage water pipe and manholes.

Sulphates-resistant cement is recommended for use in concrete exposed to large Sulphates levels.
The cement’s Sulphates resistance is due to its low tri-calcium aluminate (C3A) content.

Applications
Concrete works subjected to aggressive soils or ground water and where high Sulphate exposure is expected. It is also suitable for foundation work.
Sewage works
Precast sewage water pipe and manholes